Lenco LS-300 Replacement Needle
Belt drive · 33 and 45 rpm · Built-in phono preamp
Model codes: LS-300WD, LS-300BK
The needle you need
ATN3600LC
Lenco names the ATN3600L, which Audio-Technica has replaced with the ATN3600LC.
Originally fitted: ATN3600L
- Genuine Audio-Technica part
- Conical tip
Do you need a phono preamp?
A phono preamp boosts the very quiet signal from the cartridge.
The LS-300 has one built in. We have not found whether it can be switched off.
Speakers that work with the LS-300
Connect the LS-300's RCA output to the line input on any of these.
QR65
Has a subwoofer output, if you want more bass later.
Coda W
Also has a phono input, for a record player without a built-in preamp.
M20
Also has an optical input, for a TV.
Key facts: Lenco LS-300
- DriveBelt drive
- Speeds33 and 45 rpm
- CartridgeAT3600
- Built-in phono preampYes
- BluetoothYes, receives from a phone
- USBNo
- Dust coverYes
- Size (W × D × H)425 × 345 × 155 mm
- Weight7.22 kg
Other record players that take the ATN3600L
- Audio-Technica AT-LPGO
- Audio-Technica AT-PL50
- Audio-Technica AT-SB
- Lenco L-3809
- Lenco L-3810
- Lenco L-3818
- Lenco LBT-188
- Lenco LBTA-165
- Lenco LS-410
- Lenco LS-430
- Lenco LS-440
- Lenco LS-470
- Lenco LS-480
- Lenco LS-500
- Lenco LS-570
- TEAC TN-175
- TEAC TN-180BT
- TEAC TN-280BT
- Victrola Automatic Turntable
- Victrola Eastwood and Eastwood II
- Victrola Eastwood LP
- Victrola Revolution GO Portable Rechargeable
How to change the needle on the LS-300
With the arm on its rest, hold the AT3600 cartridge still, pull the old needle forward and down by its front lip, then push the ATN3600LC in from the front until it sits flush.
We take these details from Lenco's own website and check them carefully, but makers change parts and part numbers, and we may miss an update. Before you buy, check the part on Lenco's official website. If you spot an error, please tell us.