Victrola Aviator Signature Replacement Needle
Belt drive · 33, 45 and 78 rpm · Built-in phono preamp
Model code: VTA-754B-MAH
The needle you need
ITNP-LC1
The Aviator Signature takes the Victrola ITNP-LC1 needle.
- Genuine Victrola part
Do you need a phono preamp?
A phono preamp boosts the very quiet signal from the cartridge.
The Aviator Signature has one built in. We have not found whether it can be switched off.
Speakers that work with the Aviator Signature
Connect the Aviator Signature's RCA output to the line input on any of these.
ORA
Has a subwoofer output, if you want more bass later.
The Fives
Also has a phono input, for a record player without a built-in preamp.
QR65
Bass drivers 70 mm across.
Key facts: Victrola Aviator Signature
- DriveBelt drive
- Speeds33, 45 and 78 rpm
- Built-in phono preampYes
- BluetoothYes
- USBYes
Other record players that take the ITNP-LC1
How to change the needle on the Aviator Signature
With the arm on its rest, pull the flat needle carrier down and forward from under the cartridge, then push the ITNP-LC1 up into the same place until it clicks.
We take these details from Victrola's own website and check them carefully, but makers change parts and part numbers, and we may miss an update. Before you buy, check the part on Victrola's official website. If you spot an error, please tell us.